From 1fb1c3b41dd478168fce17f44719f7fda16df55b Mon Sep 17 00:00:00 2001
From: Jonas Smedegaard <dr@jones.dk>
Date: Tue, 10 Oct 2023 14:37:03 +0200
Subject: initial draft

---
 main.ino | 73 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 73 insertions(+)
 create mode 100644 main.ino

(limited to 'main.ino')

diff --git a/main.ino b/main.ino
new file mode 100644
index 0000000..62f755a
--- /dev/null
+++ b/main.ino
@@ -0,0 +1,73 @@
+// Pill dispenser
+
+// Inspired by article "Blink Without Delay"
+// https://docs.arduino.cc/built-in-examples/digital/BlinkWithoutDelay
+
+// Inspired by basic usage documentation of GEM library
+// https://github.com/Spirik/GEM
+
+#include <Button.h>
+
+// assume that any ESP32 board is a Lilygo T5 V2.2
+#if defined(ESP32)
+#define LILYGO_T5_V22
+#endif
+
+// use built-in buttons and LEDs when possible
+#if defined(LILYGO_T5_V22)
+#include "boards.h"
+const byte movePin = BUTTON_1;
+const byte selectPin = BUTTON_1;
+const int statusPin = LED_PIN;
+#else
+const byte movePin = 2;
+const byte selectPin = 3;
+const int statusPin = LED_BUILTIN; // pin 13 is built-in LED on many Arduino boards
+#endif
+
+Button button1(movePin);  // Connect between pin 2 and GND
+
+int i = 0;
+
+void setup() {
+  button1.begin();
+
+  // put your setup code here, to run once:
+  Serial.begin(115200);
+
+  // Emit actions on pin #3
+  pinMode(13, OUTPUT);
+}
+
+void loop() {
+  // put your main code here, to run repeatedly:
+
+  // læs om der bliver trykket på knappen
+  // hvis der trykes - så udfør noget. (her vis tekst på skærm)
+  if (button1.pressed()) {
+    Serial.println("action requested!");
+  }
+
+  //Hvis ovenstående sker, så giv output i pin #3 (evt lys) - her blinker den.
+  if (i < 8) {
+    digitalWrite(13, LOW);
+    i++;
+  } else {
+    digitalWrite(13, HIGH);
+    i = 0;
+  }
+  delay(100);
+
+  //Næste trin skal vi have den til at aflæse knappen igen.
+  if (button1.pressed()) {
+    Serial.println("hvilken borger?");
+    digitalWrite(13, HIGH);
+    while (true) {
+      delay(100);
+      if (button1.pressed()) {
+        Serial.println("stoooop!");
+        break;
+      }
+    }
+  }
+}
-- 
cgit v1.2.3