From e8b5d5cb0840d3da931fe87b5e9b5cb3e3e77d5d Mon Sep 17 00:00:00 2001
From: Jonas Smedegaard <dr@jones.dk>
Date: Wed, 11 Oct 2023 10:19:46 +0200
Subject: use BlinkControl

---
 main.ino | 25 ++++++++++---------------
 1 file changed, 10 insertions(+), 15 deletions(-)

(limited to 'main.ino')

diff --git a/main.ino b/main.ino
index 571bfe0..88d132f 100644
--- a/main.ino
+++ b/main.ino
@@ -7,24 +7,22 @@
 // https://github.com/Spirik/GEM
 
 #include <EasyButton.h>
+#include <BlinkControl.h>
 
 const int longpress_duration = 2000; // time in milliseconds
 
+// use built-in buttons and LEDs when possible
 #if defined(ESP32)
 // dirty hack: assume that any ESP32 board is a Lilygo T5 V2.2
 #define LILYGO_T5_V22
-#endif
-
-// use built-in buttons and LEDs when possible
-#if defined(LILYGO_T5_V22)
 #include "boards.h" // source: https://github.com/lewisxhe/GxEPD/blob/master/src/boards.h
 const byte BUTTON_PIN_MOVE = BUTTON_1;
 const byte BUTTON_PIN_SELECT = BUTTON_2;
-const int LED_PIN_STATUS = LED_PIN;
+BlinkControl led(LED_PIN);
 #else
 const byte BUTTON_PIN_MOVE = 2;
 const byte BUTTON_PIN_SELECT = 3;
-const int LED_PIN_STATUS = LED_BUILTIN; // pin 13 is built-in LED on many Arduino boards
+BlinkControl led(LED_BUILTIN); // pin 13 is built-in LED on many Arduino boards
 #endif
 
 // serial port speed
@@ -46,30 +44,27 @@ void setup() {
   button_move.onPressedFor(longpress_duration, onButtonMoveLongpressed);
   button_select.onPressed(onButtonSelectPressed);
 
-  // Emit actions on pin #3
-  pinMode(LED_PIN_STATUS, OUTPUT);
+  led.begin();
+  led.breathe(2000);
 }
 
 void loop() {
+  led.loop();
   button_move.read();
   button_select.read();
 }
 
 void onButtonMovePressed() {
     Serial.println("button MOVE clicked");
+    led.blink2();
 }
 
 void onButtonMoveLongpressed() {
     Serial.println("button MOVE long-clicked");
+    led.off();
 }
 
 void onButtonSelectPressed() {
     Serial.println("button SELECT clicked");
+    led.on();
 }
-
-/*
-void blink() {
-  state = !state;
-  Serial.println(state);
-}
-*/
-- 
cgit v1.2.3