From f94885c5d846fe04b82ba7553e6f00989c60c439 Mon Sep 17 00:00:00 2001
From: Jonas Smedegaard <dr@jones.dk>
Date: Wed, 26 May 2021 16:56:15 +0200
Subject: update SETUP doc and gitolite hook

---
 SETUP.md                                | 78 +++++++++++++++++++++++++++------
 lib/gitolite3/hooks/common/post-receive | 19 +++++++-
 2 files changed, 81 insertions(+), 16 deletions(-)

diff --git a/SETUP.md b/SETUP.md
index 25b7508..6ec5e2a 100644
--- a/SETUP.md
+++ b/SETUP.md
@@ -1,3 +1,5 @@
+# Setting up source hosting
+
 NB! Some system-specific strings are used
 which you may need to adapt depending on your local setup:
 
@@ -12,35 +14,83 @@ Gitolite service need to know the public SSH key of its administrator.
 You can let it ask during install,
 but it may be more convenient to preconfigure that information instead.
 
-One way to preconfigure the needed SSH public key
-is to run this command
+**On your local host**,
+print your SSH public key
+e.g. with this command
 **from your personal system**
-which then **logs into the server system** using ssh
 (adapt to replace ed25519 if your SSH keypair use a different algorithm):
 
-	printf 'gitolite3 gitolite3/adminkey select "%q"' $(cat ~/.ssh/id_ed25519.pub) | ssh {{githost}} sudo debconf-set-selections
-
-Another way is to somehow locate your public SSH key
-and run this command
-(adapt to replace $YOURKEY with your actual key):
-
-	echo gitolite3 gitolite3/adminkey select "$YOURKEY" | sudo debconf-set-selections
+	cat ~/.ssh/id_ed25519.pub
 
-Then preconfigure git user,
+**On the server**,
+preconfigure git user
+with above public key (the whole line without newline) as $YOURKEY,
 and install needed packages:
 
+	echo gitolite3 gitolite3/adminkey select "$YOURKEY" | sudo debconf-set-selections
 	echo gitolite3 gitolite3/gituser select git | sudo debconf-set-selections
-	sudo apt install gitolite3 git-daemon-sysvinit cgit cmark highlight
+	sudo apt install gitolite3 myrepos git-daemon-sysvinit cgit cmark highlight
 
 
 ## Configure git access
 
-FIXME
+**On your local host**,
+Clone the gitolite3 settings repository:
+
+	git clone git@{{githost}}:gitolite-admin
+
+**On your local host**,
+edit the file gitolite.conf,
+e.g. add these likes to add repository "foobar":
+
+	FIXME
+
+
+## Enable hook
+
+**On the server**,
+clone the redpill feature project for source-hosting
+and register with myrepos (to ease later update):
+
+	mkdir --parents /usr/local/share/redpill
+	cd /usr/local/share/redpill
+	git clone https://source.redpill.dk/source-hosting.git
+	mr reg
+
+Edit the file `/etc/gitolite3/gitolite.rc`
+to have `LOCAL_CODE` point into the project cloned above,
+i.e. the line should look like this:
+
+	LOCAL_CODE =>  "/usr/local/share/redpill/source-hosting/lib/gitolite3",
+
+Refresh gitolite setup
+by running this command:
+
+	sudo -u git gitolite setup
+
+
+## Web export
+
+FIXME: move to separate feature
+
+**On the server**,
+grant access for gitolite to write below /var/www
+with this command:
+
+	FIXME
+
+**On your local host**,
+edit the file gitolite.conf
+to add FIXME to repos that should be exported for web publishing,
+e.g. add these likes to add repository "foobar":
+
+	FIXME
 
 
 ## Configure web access
 
-Adapt the file `/etc/default/git-daemon`:
+**On the server**,
+adapt the file `/etc/default/git-daemon`:
 
 	GIT_DAEMON_ENABLE=true
 	GIT_DAEMON_USER=gitdaemon
diff --git a/lib/gitolite3/hooks/common/post-receive b/lib/gitolite3/hooks/common/post-receive
index ab100d9..9c9aed7 100755
--- a/lib/gitolite3/hooks/common/post-receive
+++ b/lib/gitolite3/hooks/common/post-receive
@@ -2,12 +2,16 @@
 # This gitolite3 hook exports content for web publishing.
 
 # The following gitolite3 environment variables affect its use:
-# WEB_BRANCH    tree-ish (hook silently skipped if unset)
-# WEB_BASEDIR   path writable by gitolite3 (default: /var/www/gitolite3)
+# WEB_BRANCH     tree-ish (hook silently skipped if unset)
+# WEB_BASEDIR    path writable by gitolite3 (default: /var/www/gitolite3)
+# WEB_EXEC_INIT  command executed in exported dir after initial checkout
+# WEB_EXEC       command executed in exported dir after every checkout
 
 set -eu
 
 WEB_BRANCH=${GL_OPTION_WEB_BRANCH:-}
+WEB_EXEC=${GL_OPTION_WEB_EXEC:-}
+WEB_EXEC_INIT=${GL_OPTION_WEB_EXEC_INIT:-}
 
 [ -n "$WEB_BRANCH" ] || exit 0
 
@@ -20,8 +24,19 @@ export GIT_WORK_TREE
 pwd
 echo "Checking out content to $GIT_WORK_TREE ..."
 
+init=1
+[ -e "$GIT_WORK_TREE" ] || init=
+
 git checkout -f "$WEB_BRANCH"
 
 chmod -R u=rw,go=r,a+X "$GIT_WORK_TREE"
 
+if [ -n "$WEB_EXEC_INIT" ] && [ -n "$init" ]; then
+	( cd "$WEB_BASEDIR" && echo "$WEB_EXEC_INIT" | sh - )
+fi
+
+if [ -n "$WEB_EXEC" ]; then
+	( cd "$WEB_BASEDIR" && echo "$WEB_EXEC" | sh - )
+fi
+
 echo "Checkout completed succesfully!"
-- 
cgit v1.2.3